What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
12.06.2025 15:52
This is where this question deviates from being a 'generic' question, and becomes more specific.
There are two important concepts here.
There are three different concepts here that are getting confused.
Reality TV star cited in Las Vegas for battery after knocking man out - AL.com
2024–10–10[John johnson John Johnson ]
Upvotes:
Can the fuse protect the electronic devices from lightning instead of a surge protector.
AI risks 'broken' career ladder for college graduates, some experts say - ABC News
These devices are installed between the “hot” and “neutral” and protective ground.
First Sentence:
so, what happens?
Weight stigma isn’t just cruel — it makes losing weight harder - CNN
nine
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
Analysts Look to Tesla’s Robotaxi Launch After Stock Hit From Musk-Trump Spat - Investopedia
At one ohm, the resistor has a maximum of 1 watt power.
For this case there are devices called Metal oxide varistors (MOV).
Because the load is inductive, the current lags the voltage.(by a bit).
the problem then depends on "how fast does the fuse operate?".
It also is a device that limits the change in current flow.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
Willi Castro homers twice, Royce Lewis ends skid as Twins crush Athletics - Sports Illustrated
The other is “what does a “fuse” do?”
But… the neutral is now “floating” because of the 1 ohm resistance.
He then describes Rainy Season and Lightning.
How to reduce your risk of melanoma and other skin cancers - KSLTV.com
He then asserts :
One is “what exactly is in a ‘surge protector’ ? ”
In schematic diagrams this is the symbol for a fuse:
What are some good Caribbean islands to travel to with friends or family? Why?
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
2024–10–14 [Omar Gharbi Omar Gharbi ]
I post the exact comment here.
The third is lightning and “how it gets conducted into a home.”
but this device (an Inductor) … impedes the rapid changes in the current.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
2 dead in Las Vegas Strip shooting, with suspect known but not yet arrested, police say - ABC News
(Dc diagram shown, AC is similar).
These are simplified answers to the original question, and does not change anything I wrote above.
This one hit behind the barn.
[old diagram got deleted by accident]
A circuit breaker is similar, but is resettable.
eight
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
What does a fuse do?
[image of Common-mode choke]
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
What is lightning?
This device then solves the entire problem.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
The MOV will conduct when the voltage exceeds 50% of line voltage.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
But it can get overloaded, and no longer works.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
An AC voltage/ current source, and an ac inductive load.
The bolt then partially travels down the line to your home.
Edit 2024–10.
what exactly is a ‘surge’ protector?
but I think this circuit , shows a few more pieces.
a photo is worth a thousand words.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
It seems Mohan does not understand the difference between a comment and an Answer.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
At least they know the answer if they wanted it.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
He then describes the function of a fuse.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
So, the voltage could go up to 500 volts, and the fuse will not open up.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
A fuse is a non-resetable over current circuit protector.
Barnstars:
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
2024–10–16 [ OO OLAOYE OYEBODE ]
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
Now when you have a certain ac resistance, then a current flows in a loop.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
One
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
Here is a simplified AC power diagram.
This is where the MOV conducts again, and dissipated the energy.
This is 'the assistant's answer'